Jiangsu Zhongtong Weiye Special Steel Co. LTD
Jiangsu Zhongtong Weiye Special Steel Co. LTD.
Add to Cart
45°,90° Elbow Carbon Steel Butt Welded and Seamless Pipe Fitting
45° Elbow
The function of a 45° elbow is the same as a 90° elbow, but the measurement of dimensions is different to that of the 90° elbow. The radius of a 45° elbow is the same as the radius of the 90° LR (1.1/2D). However, the center to face dimension is not equivalent to the radius as in 90° LR elbows. This is measured from each face to the point of intersection of the center lines perpendicular to each other, distances B on the image. This is due to the smaller degree of bend. Short radius 45° elbows are not available.
The function of a elbow is to change direction or flow in a piping system. By default, there are 5 opportunities, the 45°, 90° and 180° elbows, all three in the “long radius” version, and in addition the 90° and 180° elbows both in the “short radius” version.
| Outside Diameter | Wall Thickness (mm) | Theoretical Weight | |||
| 45° | 90° | 180° | |||
| INCH | MM | SCH40 | KG | KG | KG |
| 1/2 | 21.3 | 2.77 | 0.04 | 0.08 | 0.16 |
| 3/4 | 26.7 | 2.87 | 0.05 | 0.1 | 0.21 |
| 1 | 33.4 | 3.38 | 0.08 | 0.16 | 0.3 |
| 1 1/4 | 42.2 | 3.56 | 0.13 | 0.25 | 0.5 |
| 1 1/2 | 48.3 | 3.68 | 0.18 | 0.38 | 0.72 |
| 2 | 60.3 | 3.91 | 0.38 | 0.65 | 1.3 |
| 2 1/2 | 73.0 | 5.16 | 0.65 | 1.29 | 2.58 |
| 3 | 88.9 | 5.49 | 1.02 | 2.03 | 4.06 |
| 3 1/2 | 101.6 | 5.74 | 1.22 | 2.45 | 4.87 |
| 4 | 114.3 | 6.02 | 1.93 | 3.85 | 7.1 |
| 5 | 141.3 | 6.55 | 3.26 | 6.51 | 13.6 |
| 6 | 168.3 | 7.11 | 6.06 | 10.1 | 20.2 |
| 8 | 219.1 | 8.18 | 7.96 | 18.9 | 21.8 |
| 10 | 273.1 | 9.27 | 12.5 | 25 | 50 |
| 12 | 323.9 | 9.53 | 38.6 | 66.1 | 108 |
| 14 | 355.6 | 9.53 | 34.1 | 68.1 | 136 |
| 16 | 406.4 | 9.53 | 44.7 | 39.3 | 179 |
| 18 | 457.2 | 9.53 | 56.5 | 113 | 226 |
| 20 | 508 | 9.53 | 70 | 140 | 230 |
| 22 | 558.8 | 9.53 | 77 | 170 | 340 |
| 24 | 609.6 | 9.53 | 101 | 202 | 404 |
| 26 | 660.4 | 9.53 | 119 | 238 | 476 |
90 Elbow
